| Specification | Details |
|---|---|
| Product Type | Addressable RGB Pixel LED Strip (Dream Colour) |
| IC / Chipset | WS2812B (5V) | WS2811 / 1903 / TM1934 (12V) |
| Colour | Full RGB — each LED individually addressable |
| Voltage Options | 5V DC / 12V DC |
| LED Density Options | 30, 60, or 144 LED per metre |
| Waterproof Grades | IP20 (indoor) / IP65 (semi) / IP67 (outdoor, silicon) |
| Length | 5 metre roll (60 LED variants) / 1 metre (144 LED variants) |
| Control | Works with Koshi pixel controllers — T1000S, SP621E, SP107E, etc. |
| Cuttable / Solderable | Yes, at marked cut points |
| Brand | Koshi Electronics |
Addressable Pixel LED RGB Strip — a fully programmable "dream colour" strip where every LED is individually controllable for chasing, gradient, and animated effects. Choose your IC, voltage, density, and waterproof grade to match any indoor or outdoor project.
Key Features
- Individually addressable — every LED controllable for true dream-colour effects.
- WS2812B (5V) & WS2811 (12V) — pick the IC that suits your run length and resolution.
- 3 densities — 30, 60, or 144 LED per metre.
- 3 waterproof grades — IP20 indoor, IP65 semi, IP67 outdoor.
- Cuttable & solderable — trim and join at marked cut points.
Configurations
| Voltage | IC | Density | Length | Power (approx) |
|---|---|---|---|---|
| 5V | WS2812 | 60 LED/m | 5 m (300 LED) | 18 W/m |
| 5V | WS2812B | 144 LED/m | 1 m (144 LED) | 40 W/m |
| 12V | WS2811 | 30 LED/m | 5 m (150 LED / 50 IC) | 7 W/m |
| 12V | WS2811 / 1903 / TM1934 | 60 LED/m | 5 m (300 LED / 100 IC) | 14 W/m |
Which Waterproof Grade?
IP20 — indoor only, no protection. IP65 — semi-waterproof, handles splashes and light rain. IP67 — fully waterproof silicon sleeve, for outdoor and direct rain.
Premium Quality Options
Want the best-grade LEDs? Two upgrades we recommend:
- Best 5V option — SK6812: superior colour consistency and reliability over standard WS2812B. View the SK6812 5V strip →
- Best 12V option — WS2811 Worldsemi original IC (copper PCB): genuine Worldsemi IC on a copper PCB for better heat dissipation and longer life. View the Worldsemi WS2811 12V strip →
What You Need
To run this strip you'll need a pixel controller (T1000S, SP621E, SP107E, etc.) and a matching SMPS power supply (5V for 5V strips, 12V for 12V strips). Both available at Koshi Electronics.
How To Set Up
Connect Controller DATA → Strip DATA-IN (follow the arrow), Controller GND → Strip GND, then power the strip from a matching SMPS. Set the IC type and pixel count on your controller, load an effect, and power on. For long 5V runs, inject power at both ends to avoid brightness drop.
Questions on configuration or setup? WhatsApp +91 93107 85954 or email store@koshielectronics.in.
