12V 16-Channel DMX Sync Chaser Controller — Multi-Board Master/Slave Running Light

⚠️ NOTE: Ye controller sirf 12-Volt single-colour LED ke saath kaam karta hai — LED strip ho ya 50-LED bunch, dono chalengi. 12V LED bulb, LED strip aur LED module bhi chala sakte hain (koi bhi 12V load, 4 Amp tak per channel). RGB / Pixel LED aur 220V AC lari ke liye NAHI hai.

🎆 India ka sabse advanced 16-channel running-light chaser — ab ek se zyada board ko aapas me SYNC karke chalao. Do ya zyada controller bilkul ek jaisa (Mirror) chalao, ya kai boards jodkar 32 / 48 / 64 / 80 channel ka ek bada animation banao jahan light ek board se doosre board tak bilkul smooth travel karti hai — jaise ek hi lambi jhalar ho.

⭐ Khaas Features

• 🔥 16 Channels single-colour LED output
• 🎞️ 100+ built-in effects — runners, meteors, comets, scanners, wipes, theatre chase, strobe, sparkle & breathing
• 🎚️ Speed control knob (potentiometer) — live fast/slow
• 🔒 Design Lock with Memory — favourite effect lock karo; power cut ke baad bhi wahi chalega
• 🔗 Multi-Board SYNC (RS-485) — 2 se 5 board tak pixel-perfect sync
• 📏 Extended Mode — boards jodkar 32 / 48 / 64 / 80 channel
• 🪞 Mirror Mode — saare boards ek jaisa show
• ⚙️ Powerful 6292 transistors — bina heatsink, har channel 4 Amp tak load
• 🔋 12V DC operation
• 🇮🇳 Made in India — Koshi Electronics quality

💡 Load Capacity (per channel)

Recommended: 5 bunch (50-LED) 12V single-colour LED per channel. Ya koi bhi 12V load 4 Amp tak per channel — LED bulb, LED strip, LED module. Har channel me 6292 power transistor (bina heatsink) — 4A se zyada load na dein.

🔗 Sync Modes

🪞 Mirror Mode: 2+ board bilkul same 16-channel pattern — ek jaisa show.
📏 Extended Mode: Board 1 = LED 1–16, Board 2 = 17–32… light poore setup me ek sire se doosre sire tak chalti hai. 2 board = 32ch, 3 = 48ch, 4 = 64ch, 5 = 80ch.

🎛️ Setting Kaise Kare (Bahut Aasan!)

Board par 7 chhote switch hain (1 se 7). Bas inhe ON/OFF karke setting hoti hai 👇

   1   2   3   4   5   6   7
 ┌───────────────────────────┐
 │ ▢   ▢   ▢   ▢   ▢   ▢   ▢ │   ⬅️ DIP Switch
 └───────────────────────────┘

Har switch ka kaam:

• 🔢 Switch 1, 2, 3, 4 = Number 2, 3, 4, 5
  (Master pe = kitne board total · Slave pe = ye board ka number)
• 🪞 Switch 5 = Mirror (saare board ek jaisa)
• 👑 Switch 6 = Master (OFF) / Slave (ON)
• 🔒 Switch 7 = Design Lock (favourite effect lock)

👉 Ready settings (bas itna yaad rakho):

• 💡 1 Board (16 ch): saare switch OFF ✅
• 🔗 2 Board (32 ch): Master → SW1 ON · Slave → SW6 + SW1 ON
• 🔗 3 Board (48 ch): Master → SW2 ON · Slave-2 → SW6+SW1 · Slave-3 → SW6+SW2
• 🔗 4 Board (64 ch): Master → SW3 ON · Slaves → SW6 + (SW1, SW2, SW3)
• 🔗 5 Board (80 ch): Master → SW4 ON · Slaves → SW6 + (SW1, SW2, SW3, SW4)
• 🪞 Sab ek jaisa (Mirror): Master → SW5 ON · Slaves → SW6 ON

🔌 Sync wiring: sabhi boards ka A↔A, B↔B, GND↔GND jodo. Har board ka apna 12V power, GND common. (Poora DIP chart manual me hai — upar Download button.)

📦 In the Box

1 × 16-Channel DMX Sync Chaser Board (Heavy-Duty) · Instruction card.

❓ FAQ

❓ Kya isse 220 Volt wali lari / series light chala sakte hain?
❌ Nahi. Ye sirf 12 Volt DC ke liye hai. 220V AC lari / rice light isse chalegi nahi (aur khatarnak bhi hai). 220V ke liye Koshi Electronics ka alag “220V AC Chaser Kit” use karein.

❓ Isme kaunse LED chalte hain?
12V single-colour LED (strip ya 50-LED bunch), 12V LED bulb, LED strip aur LED module. Koi bhi 12V load 4 Amp tak per channel. RGB / pixel LED ke liye nahi.

❓ Power supply kaunsa chahiye?
12V DC SMPS. Total load ke hisaab se wattage chunein (Koshi 12V Rainproof / Slim SMPS recommended).

❓ Heatsink lagana padega?
Nahi. 6292 power transistor bina heatsink ke lage hain aur 4 Amp per channel tak safe hain. Isse zyada load na dein.

❓ 2 ya zyada board sync kaise chalao?
Dono me yahi controller lagao, RS-485 se A-A/B-B/GND jodo, ek ko Master (SW6 OFF) aur baaki ko Slave (SW6 ON) set karo. Pixel-perfect sync milega.

❓ 32/48/64/80 channel kaise banau?
Extended mode — boards ko chain karo aur DIP se Master pe total boards, har Slave pe uska number set karo.

❓ Effects / speed kaise badlein?
Effects apne aap chalte hain; on-board knob se speed adjust karein. Chahein to free PC tool se apni playlist bhi bana sakte hain.

❓ Power cut ke baad setting yaad rehti hai?
Haan — Design Lock (SW7) se lock kiya effect memory me save hota hai, power aane par wahi chalta hai.

❓ Kya ye DMX512 console se chalega?
Ye ek Master–Slave sync controller hai (apna sync system). Standard DMX512 console ke liye design nahi kiya gaya.

❓ Warranty & shipping?
Made in India, quality tested. Free shipping (as applicable). Help ke liye Koshi Electronics support se sampark karein.

📘 Need help setting up? Download the full User Manual (English + Hindi) →