▶️ Watch: 6 Channel AC Running Light Chaser 220V Demo
📄 Overview
The 6 Channel AC Running Light Chaser drives decorative lights, sign boards and LED belts with 60 running-light animations, straight from 220V AC mains. Each of the 6 channels handles up to 800W (4800W total), with a fully isolated, professional-grade design, a 3-mode switch, adjustable speed, and wireless sync to run multiple boards as one. Plug and play — no programming needed.
📋 Specifications
| Specification | Details |
|---|---|
| Input Voltage | 220V AC (50Hz) |
| Output Channels | 6 |
| Max Load Per Channel | 800W (800Watt) |
| Max Total Load | 4800W (4.8KW) across all 6 channels |
| Number of Effects | 60 |
| Speed Control | Adjustable knob (fast to slow) |
| Sync Feature | Wireless Sync — multiple boards run together |
| Mode Switch | Single LED / Double LED / Full Playlist |
| AC Switch Component | BT136 TRIAC |
| Safety | Fully isolated (optocoupler), heat shrink on live connections |
| Warranty | 1 Month on the board (manufacturing defects); TRIAC output not covered |
📖 User Manual
Drive decorative lights, sign boards, LED belts and festival decorations with 60 running-light animations — from one board powered directly by 220V AC. Each channel handles up to 800W.
Why This Is Different
| Feature | Basic Chasers | Koshi AC Chaser |
|---|---|---|
| Isolation | ❌ None — risky | ✅ Optocoupler — fully isolated |
| AC Switch | ❌ Basic transistor/relay | ✅ BT136 TRIAC |
| Load | ❌ Low wattage | ✅ 800W/channel · 4800W total |
| Insulation | ❌ Exposed live parts | ✅ Heat shrink on live joints |
| Multi-Board | ❌ Not possible | ✅ Wireless Sync |
🏭 Made in Our Factory
Key Features
- 60 effects — scanner, bounce, wipe, strobe, sparkle, theater chase, accordion & more
- Wireless Sync — many boards, same animation, perfectly in step
- Speed knob — fast to slow, live
- Plug & play — no programming
3 Modes — One Switch
| Switch | Mode | Best For |
|---|---|---|
| UP | Single chase | Borders, gates |
| CENTRE | All 60 effects | Festival, shop fronts |
| DOWN | Double chase | LED belts, stages |
Specifications
| Input | 220V AC, 50Hz |
| Channels | 6 |
| Max Load | 800W per channel · 4800W total |
| Controls | Mode switch, speed knob, sync switch |
How To Use
- Connect lights to CH1–CH6, then 220V AC. Wire everything before power-on.
- Pick a mode and set the speed.
- Multiple boards: close the Sync Switch on all and power on together.
Warranty: 1 month on the board. A short or wrong wiring damages only the TRIAC (not covered), not the board.
Safety: power off before wiring · don't touch outputs when on · keep dry.
❓ FAQs
Can I control 12V or 5V LED lights with this?
No — this is for 220V AC lights only. For 12V or 5V, use our DC controllers.
How much load can each channel take?
Up to 800W per channel, and up to 4800W (4.8KW) total across all 6 channels.
Can I run multiple boards together?
Yes — close the Wireless Sync switch on each board and power them on together; they lock in step and run as one large display.
Does it need any programming?
No — it is plug and play. Connect your lights, switch on and it starts running immediately.
Is there a warranty on this board?
Yes — the board has a 1-month warranty against manufacturing defects. The TRIAC output devices are not covered: because the board is optocoupler-isolated from the AC/TRIAC stage, a short circuit or wrong connection damages only the TRIAC, while the board itself stays safe.
Can I use it outdoors?
Keep the board in a dry place away from rain and moisture. For outdoor use, install it inside a weatherproof enclosure.