β¨ Give your LED string that magical twinkle effect! A normal 12V single-colour LED string (lari) glows steadily β nice, but flat. π΄π’π΅ Just fit a few Koshi Flasher LED 12V DC modules randomly in between the string, and those spots start blinking and flashing on their own while the rest stay steady β creating a lively, eye-catching random twinkle across your whole decoration. ππ₯
π§ How It Works
This is a mix-in flasher module, not a standalone light. You connect it into your existing 12V single-colour LED string at random points (for example, every 8β10 LEDs). Powered by a smart MCU-based circuit, each flasher blinks automatically β so a normally constant string comes alive with a beautiful random flashing pattern. The more you add, the busier the twinkle. π
π‘ Why Add Flasher LEDs to Your String?
| Plain LED String π΄ | String + Koshi Flasher LEDs β‘ |
|---|---|
| Glows constantly, flat look | Random twinkle β catches the eye again & again |
| Ordinary decoration | Premium, festive, attention-grabbing effect |
| Needs a controller for any flashing | Built-in flashing β just wire it in π |
π Key Features
- π Mix-in twinkle effect β fit randomly inside a 12V single-colour LED string
- π§ MCU-based smart flashing β micro-controller driven premium random blink
- π§ IP67 Waterproof β safe in rain, dust & humidity, fully outdoor ready
- π Dedicated lens on each LED β brighter output & sharper flash quality
- β‘ Power: 3 Watt Β |Β π Voltage: 12V DC
- π¨ 7 colours β 6 primary colours + Warm White
- π Plug & play β starts flashing the moment power is connected, no programming
π¨ Available Colours
π΄ Red π’ Green π΅ Blue π‘ Yellow πΈ Pink βͺ White π―οΈ Warm White
π‘ Tip: match the flasher colour to your string, or mix contrasting colours for a more festive pop.
π Where to Use
- πͺ Shop & showroom fronts / sign boards
- π’ Building outlines & balcony LED strings
- π Temples, mandaps & pandal lighting
- πͺ Diwali, festival & wedding decoration
- π Thoran, festoon & event / stage dΓ©cor
π Specifications
| Type | Mix-in Flasher / Blinker LED Module |
| π Use | Fitted randomly inside a 12V single-colour LED string |
| β‘ Power | 3 Watt |
| π Voltage | 12V DC |
| π§ Flashing | MCU-based automatic random blink |
| π§ Waterproof | IP67 rated |
| π Optics | Dedicated lens over each LED |
| π¨ Colours | Red, Green, Blue, Yellow, Pink, White, Warm White |
β Frequently Asked Questions
Q. How do I use this flasher LED? π€
A. It is a mix-in module. Fit it randomly in between your existing 12V single-colour LED string β those points will blink automatically while the rest of the string stays steady, giving a random twinkle effect. β
Q. Does it flash on its own or need a controller? π§
A. It flashes completely on its own thanks to a built-in MCU circuit. Just wire it into the 12V string β no controller or programming needed. π
Q. How many flashers should I add to one string? π’
A. It depends on the effect you want. Adding one every 8β10 LEDs gives a nice balanced twinkle; add more for a busier, sparklier look. π
Q. Will it get damaged in the rain? π§οΈ
A. No. It is IP67 waterproof, so it works safely outdoors in rain, dust and humidity. π§
Q. Which colour should I choose? π¨
A. Match the flasher to your string colour for a subtle twinkle, or pick a contrasting colour for a bolder, more festive pop. Available in 7 colours. π