| Specification | Details |
|---|---|
| LED Count | 320 SK6812 pixels |
| Strip Length | 5 metres |
| Operating Voltage | 5V DC |
| LED Type | SK6812 |
| Data Configuration | Dual data lines |
| Connection | Z-Connection (straight) |
| Max Power | ~32W at full brightness |
The Koshi Electronics 5V Z-Connection Dual Data Pixel LED Strip is a professional SK6812 addressable strip with dual data lines for reliable signal on longer runs. With 320 individually addressable LEDs across 5 metres in a straight Z-connection layout, it's built for displays where signal integrity matters.
Key Features
- 320 SK6812 LEDs: individually addressable across 5 metres.
- Dual data lines: backup signal path for reliability on long runs.
- 5V DC: safe low-voltage operation.
- Z-connection (straight): simple, clean layout.
- Cuttable at designated points; works with dual-data SK6812 controllers.
Specifications
| Specification | Detail |
|---|---|
| LED Count | 320 SK6812 pixels |
| Strip Length | 5 metres |
| Operating Voltage | 5V DC |
| LED Type | SK6812 |
| Data Configuration | Dual data lines |
| Connection | Z-Connection (straight) |
| Max Power | ~32W at full brightness |
Best For
- Professional and long-run LED displays
- Commercial and gallery lighting
- Event stage and matrix displays
- Signal-critical installations
- Festive displays for Diwali, Navratri, Ganpati (Ganesh Chaturthi) and weddings
π΅ Making a Circle? Recommended Power & Controller
Building a pixel LED circle with this strip? Here's the right power supply and controller for a bright, smooth result. One 5-metre strip is enough to make a 10X30 or 12X24 matrix circle.
| Circle Size | Recommended 5V SMPS |
|---|---|
| 10X30 or 12X24 (from a 5 m strip) | 5V 10A (slim) |
| 24X24 circle | 5V 20A or 40A |
ποΈ Recommended controller: the Rainbow HD Controller β ready rainbow & HD effects, perfect for circle setups.
ποΈ Rainbow HD Controller β π 5V 10A Slim SMPS β β‘ 20A / 40A SMPS βHow To Set Up
- Connect a dual-data SK6812 controller to both data lines.
- Connect a 5V supply β check polarity carefully; reverse connection damages the LEDs instantly.
- Set IC type and pixel count, then load your animation.
- For long runs, add power injection to keep brightness even.
Frequently Asked Questions
What's the benefit of dual data?
A backup signal path improves reliability on long runs, reducing dropouts from a single data fault.
Can I make a circle with this strip?
Yes β one 5-metre strip makes a 10X30 or 12X24 matrix circle. Use a 5V 10A slim SMPS for those, or a 5V 20A/40A SMPS for a bigger 24X24 circle, with the Rainbow HD Controller. See the circle guide above.
What happens if I reverse polarity?
The LEDs can be destroyed instantly. Always verify + and β before powering on.
Can I cut the strip?
Yes, at the marked cut points. Use quality connections when extending.
What power supply do I need?
A 5V supply rated for at least ~32W (about 6β7A) for a full strip. For circle setups see the recommendations above.