The 12V Pixel LED Warm White Strip uses WS2811 addressable LEDs in warm white (2700–3000K, not RGB). 300 individually controllable LEDs over 5 metres, dimmable and animatable, 12V. Cuttable; works with 12V WS2811 controllers. Always check polarity before powering on.
| Specification | Details |
|---|---|
| LED Count | 300 WS2811 pixels |
| Strip Length | 5 metres |
| Colour | Warm White (2700–3000K) |
| Operating Voltage | 12V DC |
| Max Power | ~18W total |
| Controller | All 12V WS2811 controllers |
The Koshi Electronics 12V Pixel LED Warm White Strip creates a warm, inviting glow using WS2811 addressable LEDs in warm white (not RGB). With 300 individually controllable LEDs across 5 metres, each LED can be dimmed and animated — ideal for cosy festive and home lighting.
Key Features
- 300 warm white LEDs across 5 metres.
- Warm white (2700–3000K): cosy, elegant tone (not RGB).
- 12V DC for longer runs.
- WS2811 addressable: individual LED dimming and animation.
- Cuttable at marked points; works with 12V WS2811 controllers.
Specifications
| Specification | Detail |
|---|---|
| LED Count | 300 WS2811 pixels |
| Strip Length | 5 metres |
| Colour | Warm White (2700–3000K) |
| Operating Voltage | 12V DC |
| Max Power | ~18W total |
| Controller | All 12V WS2811 controllers |
Best For
- Home and ambient lighting
- Restaurant, café and hotel decoration
- Warm-toned building facades
- Event stage backdrops
- Festive setups for Diwali, Navratri, Ganpati (Ganesh Chaturthi) and weddings
How To Set Up
- Connect to a 12V WS2811-compatible controller.
- Use a 12V supply (at least ~18W for a full strip) — check polarity carefully.
- Set IC type and pixel count, then load your effect.
- Each LED can be individually dimmed for warm scenes.
Frequently Asked Questions
Is it warm white or RGB?
Warm white only (2700–3000K) — not colour-changing.
What power supply do I need?
About 18W max, so a 12V/2A supply is enough for one strip.
Can I cut it?
Yes, at the marked cut points.
Will it work with 5V controllers?
No — this is 12V only.
What happens if I reverse polarity?
The LEDs can be damaged instantly — always check + and − first.
Contact Us
Email: store@koshielectronics.in · WhatsApp: +91 93107 85954 · Address: Shop No. 1, Mayur Vihar, Phase 1, Delhi-110091
Email: store@koshielectronics.in · WhatsApp: +91 93107 85954 · Address: Shop No. 1, Mayur Vihar, Phase 1, Delhi-110091
Is it warm white or RGB?
Warm white only (2700–3000K) — not colour-changing.
What power supply do I need?
About 18W max, so a 12V/2A supply is enough for one strip.
Can I cut it?
Yes, at the marked cut points.
Will it work with 5V controllers?
No — this is 12V only.
What happens if I reverse polarity?
The LEDs can be damaged instantly — always check + and − first.