| Specification | Details |
|---|---|
| Type | P10 full-colour RGB outdoor LED module |
| Pixel Pitch | 10 mm |
| Matrix | 32 x 16 dots per module |
| Module Size | 320 x 160 mm |
| Voltage | 5V DC |
| Recommended SMPS | 5V — 10A (1 module), 20A (up to 3), 40A (up to 6), 60A (7-10); 10+ use multiple SMPS |
| Interface | HUB75E (works with all RGB controllers — WF1/WF2/WF4, DIY ESP, HUIDU D16+) |
| Colour | Full RGB — millions of colours |
| Variants | 2727 (standard) & 3535 (brighter) |
| Included Cables | Power cable + FRC/data cable (free with each module) |
The Koshi Electronics P10 RGB LED Display Module is a full-colour outdoor LED panel for scrolling-text displays, advertisement boards and LED ticker signs. Each pixel contains Red, Green and Blue LEDs, so the module can display millions of colours, text, graphics and animations. Available in two variants — 2727 (standard) and 3535 (brighter, larger LEDs for direct sunlight).
✓ Fully compatible with every HUB75E RGB controller, including:
- HD WiFi controllers — WF1, WF2, WF4
- DIY controllers — ESP8266 / ESP32 based
- HUIDU full-colour cards — D16 and above
This module uses the standard HUB75E interface, so it works with virtually any full-colour RGB controller.
What's In The Box
- 1 × P10 RGB LED Display Module
- Power cable — included free with each module
- FRC (flat ribbon / data cable) — included free with each module
Power Supply (SMPS) Recommendation
Choose your 5V Slim Body SMPS based on how many modules you are running:
| Number of Modules | Recommended SMPS |
|---|---|
| 1 module | 5V 10A |
| Up to 3 modules | 5V 20A |
| Up to 6 modules | 5V 40A |
| 7 to 10 modules | 5V 60A |
| More than 10 modules | Use multiple SMPS units |
2727 vs 3535 — Which Should You Choose?
| Feature | 2727 | 3535 |
|---|---|---|
| LED Size | 2.7 × 2.7 mm | 3.5 × 3.5 mm |
| Brightness | Standard | Higher (brighter) |
| Best For | Semi-outdoor, covered areas | Direct outdoor, bright sunlight |
Specifications
| Specification | Detail |
|---|---|
| Type | P10 full-colour RGB outdoor LED module |
| Pixel Pitch | 10 mm (optimised for outdoor viewing distance) |
| Matrix | 32 × 16 dots per module |
| Module Size | 320 × 160 mm |
| Voltage | 5V DC |
| Recommended SMPS | 5V — 10A (1 mod), 20A (≤3), 40A (≤6), 60A (7–10); 10+ use multiple |
| Interface | HUB75E (works with all RGB controllers — WF1/WF2/WF4, DIY ESP, HUIDU D16+) |
| Colour | Full RGB — millions of colours |
| Variants | 2727 (standard) & 3535 (brighter) |
| Included Cables | Power cable + FRC/data cable (free with each module) |
Setup & Project Videos
1. Controller Hardware Setting
2. Hardware Setting
3. Smart Scanning Setting
4. Project Video
5. Clock Project Video
How Many Modules Do I Need?
Each module is 320 × 160 mm (32 × 16 dots). Build any display size by joining modules in a grid — for example, a 4-wide × 2-high arrangement makes a board roughly 1280 × 320 mm. Plan your sign size first, then divide by the module size to get the count.
What You Also Need (Sold Separately)
A P10 module is one part of a complete display. To run it you'll also need:
- An RGB controller — for example the HD-WF2 WiFi RGB Controller (HUB75E). See all RGB controllers →
- A 5V SMPS power supply — sized to the total number of modules (see the table above). Shop the 5V Slim Body SMPS.
Best For
- Advertisement and shop display boards
- Scrolling-text and ticker signs
- Outdoor shop signage and hoardings
- Full-colour video and graphics walls
Key Features
- Full-colour RGB: displays millions of colours, text, graphics and animations.
- 10mm pixel pitch: optimised for outdoor viewing distances.
- 32 × 16 matrix: standard P10 layout, easy to tile into any size.
- Universal HUB75E interface: works with all RGB controllers — WF1/WF2/WF4, DIY ESP, HUIDU D16+.
- Two brightness options: 2727 for covered areas, 3535 for direct sunlight.
Frequently Asked Questions
What's the difference between 2727 and 3535?
Both are full-colour P10 modules. 2727 has 2.7×2.7mm LEDs (standard brightness, good for semi-outdoor/covered areas). 3535 has larger 3.5×3.5mm LEDs that are brighter — better for direct outdoor sunlight.
Does the module include cables?
Yes — a power cable and an FRC/data cable are included free with each module.
Which power supply (SMPS) should I use?
Use a 5V 10A for 1 module, 20A for up to 3 modules, 40A for up to 6 modules, and 60A for 7–10 modules. For more than 10 modules, use multiple SMPS units.
What do I need to run it?
An RGB controller (HUB75E, e.g. HD-WF2) and a 5V SMPS power supply sized to your module count. The connecting cables are included with each module.
How many modules make my sign size?
Each module is 320 × 160 mm (32 × 16 dots). Decide your board size and divide by the module size — modules tile together in a grid.
Which controllers are compatible?
Any HUB75E RGB controller — WF1, WF2, WF4, DIY ESP8266/ESP32 boards, and HUIDU D16 and above.
Can it show video and graphics, not just text?
Yes — it's full-colour RGB, so it can display text, graphics, animations and video through a compatible controller.