Cart
Your cart is currently empty.

Heat-shrink tubing for LED wiring — slides over a joint and shrinks (2:1) into a tight, insulated, waterproof seal. Sizes 0.5/1.5/2.5mm, 1m per pack, flame-retardant polyolefin rated to 125°C. For joint insulation, weatherproofing and tidy bundles.
SpecificationDetails
TypeHeat Shrink Tubing (cable protection)
Sizes0.5mm / 1.5mm / 2.5mm diameter
Length1 metre per pack
MaterialFlame-retardant polyolefin
Shrink Ratio2:1
Max TempUp to 125°C
BrandKoshi Electronics

Professional heat shrink tubing for protecting and tidying LED wiring. Slides over a joint and shrinks with heat to form a tight, insulated, waterproof seal. Available in three sizes — 0.5mm, 1.5mm and 2.5mm — to suit different wire gauges.

Key Features

  • Three sizes — 0.5mm, 1.5mm, 2.5mm
  • 1 metre length per pack — many connections
  • 2:1 shrink ratio — shrinks to half its diameter
  • Waterproof seal when properly applied
  • Flame-retardant polyolefin — rated to 125°C
  • Easy to use — heat with a lighter or heat gun

Specifications

Specification Detail
Available Sizes 0.5mm, 1.5mm, 2.5mm diameter
Length 1 metre per pack
Material Heat-shrink polyolefin
Shrink Ratio 2:1
Max Temperature Up to 125°C
Flame Retardant Yes

Best For

  • LED controller & power-supply wire joints
  • Soldered joint insulation
  • Wire-bundle organisation
  • Short-circuit prevention & weatherproofing

How To Use

  1. Slide the tube over the wire before joining.
  2. Position it to cover the full joint.
  3. Heat evenly with a lighter or heat gun until it grips.
  4. Let it cool for a permanent, sealed finish.

FAQ

Which size should I choose?
0.5mm for thin wires, 1.5mm for standard joints, 2.5mm for thicker bundles.

How many joints does 1 metre cover?
Roughly 10–20 small connections, depending on length per joint.

Is a heating tool included?
No — a lighter or heat gun is required and sold separately.

Contact Us
Email: store@koshielectronics.in · WhatsApp: +91 93107 85954 · Address: Shop No. 1, Mayur Vihar, Phase 1, Delhi-110091
Kaunsa size lein?
0.5mm thin wires ke liye, 1.5mm standard joints ke liye, 2.5mm thicker bundles ke liye.
1 metre mein kitne joints?
Roughly 10–20 small connections, joint length ke hisaab se.
Heating tool included hai?
Nahi — lighter ya heat gun chahiye (alag se).
Waterproof seal banta hai?
Haan — sahi tarah apply karne par insulated, waterproof seal banta hai (2:1 shrink, 125°C tak).