20 PORT LEDEdit PIXEL LED PARALLEL CONTROLLERKoshi Electronics ka 20 Port LEDEdit Parallel Controller un professionals ke liye hai jo large-scale pixel LED installations run karte hain — jaise building facades, stage backdrops, outdoor signage,...

20 PARALLEL PORTS 100+ HD ANIMATIONS DMX SYNC NO PC / NO SD CARD The 20 Port Pixel LED Controller with DMX Sync drives large pixel matrix displays from 20 parallel data outputs and comes...

The P1000 20-Port Pixel LED Parallel Controller drives large pixel matrix displays from 20 parallel data outputs, with beautiful pre-loaded effects ready to run out of the box. A simple onboard jumper switches between 50-...

20-Channel Universal LED Sync Chaser Controller — 5–24V · Heavy-Duty MOSFET · Multi-Board Running Light ⚠️ IMPORTANT — LED loads only: Ye controller sirf LED-type single-colour load ke liye hai — 12V/24V LED strip, 50-LED...

220V AC Bricks Light | India's #1 | Warm White | Decorative Lighting A simple plug-and-play 220V decorative light for festive and ambient lighting. Connect to mains and switch on — no controller or driver...

Transform your 220V AC decoration lights into a professional running-light show with this relay-based LED chaser kit. Designed for electricians, event decorators and commercial installations, the 220V AC Chaser Kit uses electro-mechanical relay switching and...

220V AC Neon Rope Light (50 Meter) | India's #1 | IP65 Waterproof | Multiple Colours Flexible 50-metre neon rope light for outlining buildings, gates, balconies and signage. Runs straight off 220V AC and is...

Video GuideThe Koshi Electronics 24V Pixel LED Strip is an addressable flowing-effect strip built with the FW1903 IC and SMD2835 LEDs. Available in Warm White (3000K) and CCT (adjustable warm-to-cool white), each on a 10-metre...

Video GuideThe Koshi Electronics 24V Pixel LED Dual Data Strip is an addressable RGB / RGBW strip built for large, reliable installations. It uses MT16703/MT16704 ICs with a dual-data line for signal redundancy, and runs...

24V SLIM BODY SMPS POWER SUPPLY — 120W / 200W / 400W FOR LED STRIPSKoshi Electronics ka 24V Slim Body SMPS 24V LED strips, CCT strips aur profile lighting ke liye compact, high-efficiency power supply...

3-pin male & female connectors for pixel LED wiring — used to connect Data, Positive and Ground wires between pixel LED strings, controllers and power supplies. An essential consumable for clean, professional pixel LED builds.Specifications...

Note: LED strips aur SMPS power supply is product ke saath included nahi hain — alag se purchase karni hogi.Koshi Electronics ka Stair Step LED Controller (12V / 24V) aapki staircase ko smart, automatic sequential...

32×32 HD ANIMATION PIXEL LED CONTROLLER — IC BASEDKoshi Electronics ka 32×32 HD Animation Pixel LED Controller RGB pixel LED matrices ke liye ek IC-based plug-and-play controller hai jo 1024 pixels tak (32×32 grid) built-in...

Note: LED strips aur SMPS power supply is product ke saath included nahi hain — alag se purchase karni hogi.Koshi Electronics ka 36-Channel Smart Stair Light Controller ek advanced staircase LED controller hai jo 36...

4-pin male and female connectors for RGB LED strip and pixel LED wiring. Used to connect power (R, G, B, +) between RGB strips, controllers, and amplifiers. Pins: 4-pin — suitable for RGB LED strips...

A 4-pin male & female waterproof connector for outdoor LED wiring. It lets you connect and disconnect cleanly while keeping a sealed, waterproof joint — ideal where moisture, water or weather exposure is a concern.Key...

The Koshi Electronics 40-Port JINIX Pixel LED Parallel Controller is a professional SD-card controller for large-scale pixel LED installations. With 40 parallel output ports, it drives big matrices and building-scale displays, playing your animations back...

A high-performance 40-port parallel pixel LED controller for large 5V displays. Built for smooth, high-FPS animation across big matrices, with on-board signal boosting and polarity protection for reliable large-scale installations.Key Features High FPS — fast,...

Koshi Electronics 5 Channel +Cut / −Cut 12V Chaser Running-light controller available in two variants with separate switching outputs: one with positive-line switching (+Cut) and one with negative-line switching (−Cut). Designed for Indian decorative lighting...

A reliable 5V DC power adapter for pixel LED strips and small setups. Available in three current ratings — choose the one that matches your pixel count. Choose Your Rating Rating Suitable For 5V 2A...